Starting System
STARTING SYSTEM SPECIFICATION
| Symptom | Suspect Area | Remedy |
|---|---|---|
| Engine will not crank | Battery charge low | Charge or replace battery |
| Battery cables loose, corroded or worn out | Repair or replace cables | |
| Transaxle range switch (Vehicle with automatic transaxle only) | See AUTOMATIC TRANSAXLE (F4A42) | |
| Fusible link blown | Replace fusible link | |
| Starter motor faulty | See CRUISE CONTROL SYSTEM | |
| Ignition switch faulty | Inspect | |
| Engine cranks slowly | Battery charge low | Charge or replace battery |
| Battery cables loose, corroded or worn out | Repair or replace cables | |
| Starter motor | See CHECK CRANKING VOLTAGE AND CURRENT DRAW | |
| Starter keeps running | Starter motor | See CHECK CRANKING VOLTAGE AND CURRENT DRAW |
| Ignition switch | Inspect | |
| Starter spins but engine will not crank | Short in wiring | Repair wiring |
| Pinion gear teeth broken or starter motor | See COMPONENTS | |
| Ring gear teeth broken | Repair or replace as necessary |