LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2008 >> Entourage GLS >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Memory Modules >> IMS (Integrated Memory System) >> IMS Power Seat Control >> Operation >> Easy Access Function Operation (Slide Motor Only)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Easy Access Function Operation (Slide Motor Only)

  1. Easy access function operation is allowed only when auto switch is on, and the operation will be halted if auto switch changes from on to off.
  2. If a key is removed and CAN BUS data transmitted from IPM changes from "on" to "off", the seat slide will move 50mm backward based on the IGN off point. If a key off position is farther back than 50mm against the IGN off point, get-off gearing will not be conducted. If slide rear limit becomes off in the middle of backward operation, retreat control will be halted.
  3. The following conditions will be identified and processed by IMS, and if any one of the following conditions is met, Easy access function operation will be prevented or halted.
    • When "P" position switch is not on.
    • When Vehicle Speed in CAN BUS data transmitted from cluster is "3km/h" or faster.
    • When seat and pedal is under manual switch operation.
    • When auto switch is off.
  4. When control is halted in the middle of backward operation, the remaining operation will not be completed, and when returning, it will return just as much as it retreated.
  5. It will move to IGN off point in case of Get-on gearing by key in despite manual switch input during or after backward operation.
  6. After the key is removed, on the condition of SLEEP state, Easy access function operation will be conducted after 150ms if the key is inserted when auto switch is turned ON (OFF) from Off (ON).
    Fig 1: Operational Control (SLEEP state, Easy access function operation)
    G05325165Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals