DTC P2A01 Ho2S Sensor Circuit Range/Performance (B1/S2): Specification
(REFERENCE ONLY)
VOLTAGE SPECIFICATION CHART
| Test Condition | HO2S Voltage (Sensor1) | HO2S Voltage (Sensor2) |
|---|---|---|
| HO2S Signal at idle after warm-up | Signal is commonly switching from rich to lean more than 3 times in 10 sec. | Signal is commonly above 0.6V. |
| HO2S signal at open circuit (Pumping current OFF) | Approx. 0.45V | |
| HO2S signal at open circuit (Pumping current ON) | Approx. 3.5V | |