Audio Assembly Replacement

WARNING: This page is about a different car, the 2007 Hyundai Entourage. However, it is still accessible from the selected car via links, so may be relevant.

Remove the center facia panel. (Refer to REPLACEMENT )
Loosen the screws.

Fig 1: Identifying Center Facia Panel Screws With Fastener Locations
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connector (A), then remove the audio assembly (B).

Fig 2: Identifying Audio Assembly Connector
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.

NOTE:

Make sure the connector are plugged in properly.