LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2008 >> Tucson GLS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transaxle System) >> Automatic Transaxle System >> Service Adjustment Procedure >> Vehicle Speed Sensor >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vehicle Speed Sensor: Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Lift up the vehicle.
  2. Remove the vehicle speed sensor (A).
    Fig 1: Identifying Vehicle Speed Sensor
    G04811245Courtesy of HYUNDAI MOTOR CO.
    1. Disconnect the vehicle speed sensor connector (B).
    2. Remove the bolt (10 mm (0.4 in)).
    3. Inspect the vehicle speed sensor bore.
  3. Inspect the O-ring for nicks or cut. Install a new O-ring as necessary.
  4. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
  5. Install the vehicle speed sensor.
  6. Connect the vehicle speed sensor connector.
  7. Installation is the reverse of removal.