Control Circuit Inspection
- Check for short to ground in control circuit
- Ignition "OFF".
- [P0261] Measure resistance between terminal 2 of the injector harness connector and chassis ground
[P0264] Measure resistance between terminal 1 of the injector harness connector and chassis ground
[P0267] Measure resistance between terminal 1 of the injector harness connector and chassis ground
[P0270] Measure resistance between terminal 1 of the injector harness connector and chassis ground
Specification: Infinite
- Is resistance within the specification?
YES
NO
- Repair open or short to ground in control harness and go to "VERIFICATION OF VEHICLE REPAIR " procedure