LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Elantra Touring Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Input Speed Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Speed Sensor: Installation

  1. Install the new O-ring to the input speed sensor.
  2. Install the input speed sensor (A).

    Tightening torque: 

    10~12Nm (1.0~1.2kgf.m, 7~8lb-ft)

    CAUTION: While installing the input shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
    Fig 1: Identifying Input Speed Sensor
    G05364271Courtesy of HYUNDAI MOTOR CO.
  3. Check the connector for dust, dirt, or oil, and then connect the input speed sensor connector (A) securely.
    Fig 2: Identifying Input Speed Sensor Connector
    G05364270Courtesy of HYUNDAI MOTOR CO.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals