Auto Light Function
- The Auto light function is active when the Head lamp switch is positioned to 'Auto' and the Key is in RUN position.
The auto light sensor is powered on the status ACC, START and RUN of the key position. Based on the Auto light sensor values corresponding to the exterior brightness level, it controls automatically the lighting of the Park and tail lamps or/and the Head lamps Low Beam depending on the country.
- Auto light Sensor detection table
AUTO LIGHT SENSOR DETECTION CHART
| Mode | Tail Lamps | Head Lamps Low Beam | ||
|---|---|---|---|---|
| Lux (Lux) | Voltage (V) | Lux (Lux) | Voltage (V) | |
| ON | 24 ± 5.2 | 1.77 ± 0.08V | Same as Tail lamps | |
| OFF | 48 ± 10.5 | 3.47 ± 0.1V | Same as Tail lamps | |