B1555 Wiper Multifunction Switch Error: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Wiper switch input signal check
|
- OFF & INT input line short
- OFF & LOW input line short
- OFF & HIGH input line short
- INT & LOW input line short
- INT & HIGH input line short
- LOW & HIGH input line short
|
| Enable Conditions |
- IG KEY ON.
- Engine running
|
| Threshold Value |
- OFF & INT : The voltage of OFF switch and INT switch is 0V at the same time.
- OFF & LOW: The voltage of OFF switch and LOW switch is 0V at the same time.
- OFF & HIGH : The voltage of OFF switch and HIGH switch is 0V at the same time.
- INT & LOW: The voltage of INT switch and LOW switch is 0V at the same time.
- INT & HIGH : The voltage of INT switch and HIGH switch is 0V at the same time.
|
| Diagnostic Time |
|
| DTC Erasing Time |
- DTC is erased immediately after trouble fixed
|