IMS (Integrated Memory System) Module: Inspection

1. Remove the seat control switch.
   Fig 1: Identifying Seat Control Switch Connector Terminals

   Courtesy of HYUNDAI MOTOR CO.
2. With the power seat control switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat control switch.

Power seat connector switch A

Fig 2: Power Seat Connector Switch A Connector Chart

Courtesy of HYUNDAI MOTOR CO.

Driver lumbar connector B

Fig 3: Driver Lumbar Connector B Connector Chart

Courtesy of HYUNDAI MOTOR CO.

Assist seat connector switch C

Fig 4: Assist Seat Connector Switch C Connector Chart

Courtesy of HYUNDAI MOTOR CO.