LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Santa Fe GLS, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Fuel System (2.7)) >> Accelerator Position Sensor (APS) >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Position Sensor (APS): Inspection

  1. Connect a scan tool on the Data Link Connector (DLC).
  2. Turn the ignition switch ON.
  3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.

    Specification:  Refer to "SPECIFICATION "

  4. Turn ignition switch OFF and disconnect the scan tool from the DLC.
  5. Disconnect APS connector.
  6. Measure resistance between the APS terminals 4 and 5 (APS 1).

    Specification:  Refer to "SPECIFICATION "

  7. Measure resistance between the APS terminals 1 and 6 (APS 2).

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals