Table 1 Bus Failures
BUS FAILURES CHART
| FAILURE | DESCRIPTION |
|---|---|
| 1 | CANH wire interrupted |
| 2 | CANL wire interrupted |
| 3 | CANH short-circuited to battery |
| 3a | CANH short-circuited to VCC |
| 4 | CANL short-circuited to ground |
| 5 | CANH short-circuited to ground |
| 6 | CANL short-circuited to battery |
| 6a | CANL short-circuited to VCC |
| 7 | CANL and CANH mutually short-circuited |
This code is set if IC in the control module detects the following error although an communication condition is normal; CANH wire interrupted, CANL wire interrupted, CANH short-circuited to battery, CANH short-circuited to ground, CANH short-circuited to ground, CANL short-circuited to battery, CANL and CANH mutually short-circuited.