Specifications Index
AZERA SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATION | ||
| Torque | Torque values are in the text of the AIR CONDITIONING SYSTEM article. | ||
| Axle Nut/Hub Nut | |||
| Front | 148 Ft. Lbs. (200 Nm) | ||
| Rear | N/A | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING OF BRAKE SYSTEM | ||
| Disc/Drum Brakes | |||
| Service Specifications | SPECIFICATIONS | ||
| Torque | TIGHTENING TORQUES | ||
| Charging | |||
| Generator | SPECIFICATIONS | ||
| Torque | N/A | ||
| Drive Belts | |||
| Routing | COMPONENTS | ||
| Engine Cooling | |||
| General Service Specifications | |||
| 3.3L/3.8L | SPECIFICATIONS | ||
| Radiator Cap Pressure | 14-18 psi | ||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| 3.3L/3.8L | |||
| Compression | COMPRESSION PRESSURE | ||
| Oil pressure | 18.77 psi at 1000 RPM | ||
| Overhaul | ENGINE AND TRANSAXLE ASSEMBLY | ||
| Torque | TIGHTENING TORQUES | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | 53-55 Ft. Lbs. (72-75 N.m) | ||
| Fuel System | |||
| Pressure Specification | 54.3-55.8 psi | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE TEST | ||
| Fuel Filter Location | In fuel pump assembly. | ||
| Fuel Filter R & I | FUEL PUMP | ||
| Ignition | |||
| Firing Order & Cylinder Identification | 1-2-3-4-5-6 | ||
| Spark Plug | |||
| NGK - IFR5G-11 | |||
| Gap | 0.0394-0.0433 in. (1.0-1.1 mm) | ||
| Torque | 15-22 Ft. Lbs. (20-30 N.m) | ||
| Starting | |||
| Starter | SPECIFICATIONS | ||
| Torque | N/A | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT | ||
| Torque | TIGHTENING TORQUES | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 65-80 Ft. Lbs. (90-110 N.m) | ||