LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Elantra GLS >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Output Speed Sensor >> Description and Operation (A4CF2) >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Description and Operation (A4CF2): Description

OUTPUT SPEED SENSOR DESCRIPTION

Sensor type
  1. Type : Hall Sensor
  2. Output voltage : DC 12V
  3. Current consumption : 22mA (Max)
Function
  1. Output shaft speed sensor : Detect the output shaft rpm (T/F DRIVE GEAR RPM) at the T/F drive gear
  2. Feedback control, clutch-clutch control, damper clutch control, shift range control, incorrect ratio control and sensor trouble detection signal.
Connector
G06863423Courtesy of HYUNDAI MOTOR CO.
Fig 1: Identifying Connector Terminals
G06863424Courtesy of HYUNDAI MOTOR CO.
OUTPUT SPEED SENSOR RESISTANCE - OUTPUT VOLTAGE

Item Inspection item Standard value
Air gap Output shaft speed sensor 0.025in (0.65mm)
Sensor resistance Output shaft speed sensor Over 1 MΩ
Output voltage HIGH Over 4.8V
LOW Below 0.8V
scientia non olet · About LEMON Manuals