LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Elantra SE >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Input Speed Sensor >> Description and Operation (A4CF2) >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Description and Operation (A4CF2): Description

INPUT SPEED SENSOR DESCRIPTION

Sensor type
  1. Type : Hall Sensor
  2. Operating voltage : DC 12V
  3. Current consumption : 22mA (Max)
Function
  1. Input shaft speed sensor: Detect the input shaft rotation at the OD & REV retainer side to control oil pressure when shifting.
  2. Feedback control, clutch-clutch control, damper clutch control, shift range control, incorrect ratio control and sensor trouble detection signal.
Connector
G06863417Courtesy of HYUNDAI MOTOR CO.
Fig 1: Identifying Connector Terminals
G06863418Courtesy of HYUNDAI MOTOR CO.
INPUT SPEED SENSOR RESISTANCE - OUTPUT VOLTAGE

Item Inspection item Standard value
Air gap Input shaft speed sensor 0.035in (0.9mm)
Sensor resistance Input shaft speed sensor Over 1 MΩ
Output voltage HIGH Over 4.8V
LOW Below 0.8V
scientia non olet · About LEMON Manuals