LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Genesis Coupe 2.0T Track >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Engine Control Module (ECM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

NOTE: In the case of the vehicle equipped with immobilizer, perform "Key Teaching" procedure together (Refer to TEACHING PROCEDURES ).
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the front strut assembly (Refer to FRONT SUSPENSION SYSTEM ).
  3. Disconnect the ECM Connector (A).
  4. Disconnect the TCM connector (B) [A/T].
  5. Remove the ECM bracket installation bolts (C) and nut (D).
    Fig 1: Identifying ECM Connector, TCM Connector, ECM Bracket Bolts, & Nut
    G06514126Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals