Repair Procedures

Removal

PDM(Power Distribution Module)
1. Disconnect the negative(-) battery terminal.
2. Remove the main crash pad.

3. Remove the power distribution module (A) after loosening bolts (2EA).





PDM(Power Distribution Module) Relay
1. Remove the negative(-) battery terminal.
2. Remove the front seat heater switch module.

3. After removing the bolts (2EA) and connector, remove PDM relay box (A).






Installation

PDM(Power Distribution Module)
1. Install the power distribution module.
2. Install the main crash pad.
3. Install the negative(-) battery terminal.

PDM(Power Distribution Module) Relay
1. Install the power distribution module relay box.
2. Install the front seat heater switch assembly.
3. Install the negative(-) battery terminal.