April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

Check OCV

IG "OFF".
Disconnect OCV connector.

Measure resistance between terminal 1 and 2 of OCV connector. (Component Side)

Specification:

TEMPERATURE RESISTANCE SPECIFICATION CHART

Temp.	Coil Resistance
20 °C	7.4±0.5Ω

Fig 1: Measuring Resistance Between Terminal 1 And 2 Of OCV Connector (Component Side)

G06881251

Courtesy of HYUNDAI MOTOR CO.

Is the measured resistance within specification?
YES
1. Substitute with a known - good ECM and check for proper operation.
  If the problem is corrected, replace ECM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
1. Substitute with a known - good OCV and check for proper operation.
  If the problem is corrected, replace OCV and go to "VERIFICATION OF VEHICLE REPAIR " procedure.