LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Azera GLS >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> Control Module (BCM) >> Repair Procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A). Avoid damaging retaining clip. (Refer to the CRASH PAD )
    Fig 1: Identifying Crash Pad Lower Panel
    G07250154Courtesy of HYUNDAI MOTOR CO.
  3. Remove ICM relay connector and 2 nuts.
    Fig 2: Identifying ICM Relay Connector
    G07250155Courtesy of HYUNDAI MOTOR CO.
  4. Remove the body control module (A) and tilt & telescope unit after loosening 2 nuts and disconnecting connector.
    Fig 3: Identifying Body Control Module
    G07250156Courtesy of HYUNDAI MOTOR CO.
  5. Remove the body control module (B) from the tilt & telescope unit (A) after loosening a bolt.
    Fig 4: Identifying Body Control Module And Tilt & Telescope Unit
    G07250157Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals