Transmitter Code Registration

Connect the DLC cable of scan tool to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on scan tool.

Fig 1: Connecting DLC Cable Of Scan Tool To Data Link Connector
Courtesy of HYUNDAI MOTOR CO.
Select the vehicle model and then do "CODE SAVING".

Fig 2: Selecting Transmitter Code Saving
Courtesy of HYUNDAI MOTOR CO.
After selecting "CODE SAVING" menu, push "ENTER" key, then the screen will be shown in illustration as below.

Fig 3: Display Transmitter Code Saving Screen
Courtesy of HYUNDAI MOTOR CO.
After removing the ignition key from key cylinder, push "ENTER" key to proceed to the next mode for code saving. Follow steps 1 to 4 and then code saving is completed.

Fig 4: Display Transmitter Code Saving Procedure Screen (1 Of 5)
Courtesy of HYUNDAI MOTOR CO.

Fig 5: Display Transmitter Code Saving Procedure Screen (2 Of 5)
Courtesy of HYUNDAI MOTOR CO.

Fig 6: Display Transmitter Code Saving Procedure Screen (3 Of 5)
Courtesy of HYUNDAI MOTOR CO.

Fig 7: Display Transmitter Code Saving Procedure Screen (4 Of 5)
Courtesy of HYUNDAI MOTOR CO.

Fig 8: Display Transmitter Code Saving Procedure Screen (5 Of 5)
Courtesy of HYUNDAI MOTOR CO.

NOTE: In code saving mode, it shall be possible to register up to Max 4EA.