LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Elantra GLS, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Specifications >> Repair Procedures >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Inspection

  1. Check signal waveform of Input & output speed sensor using the GDS.

    Specification:  Refer to "SIGNAL WAVEFORM " section.



  1. Turn ignition switch OFF.
  2. Disconnect the oil temperature sensor connector.
  3. Measure resistance between sensor signal terminal and sensor ground terminal.
  4. Check that the resistance is within the specification.
scientia non olet · About LEMON Manuals