LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Genesis 3.8 >> Repair and Diagnosis (Single Page) >> Transmission >> Transmission Control Systems >> Automatic Transmission Control System - Tb-65/60N >> Transaxle Control Module (TCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transaxle Control Module (TCM): Removal

  1. Disconnect (-) terminal from the battery.
    NOTE: The battery is placed right side of the temporary tire in the trunk.
    Fig 1: Identifying Battery
    G06106375Courtesy of HYUNDAI MOTOR CO.
  2. Remove the plastic cover (A) from the driver's side of the engine room.
    Fig 2: Identifying Plastic Cover
    G06106376Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the connectors (A) of ECU and TCU.
    Fig 3: Identifying ECU And TCU Connectors
    G06106377Courtesy of HYUNDAI MOTOR CO.
  4. Remove the ECU and TCU with the bracket (B) by removing the four bolts and the nut.
  5. Remove the TCU (A) from the ECU by removing the four bolts.
    Fig 4: Identifying TCU Connector With Bolts
    G06106378Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals