LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Genesis 4.6 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module >> Front Impact Sensor (FIS) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Impact Sensor (FIS): Removal

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front bumper. (Refer to REPLACEMENT
  3. Disconnect the Front Impact Sensor connector.
  4. Remove the Front Impact Sensor mounting screw.
    Fig 1: Identifying Front Impact Sensor Mounting Screw
    G06100953Courtesy of HYUNDAI MOTOR CO.
  5. Remove the Front Impact Sensor.
scientia non olet · About LEMON Manuals