LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Genesis Coupe 3.8 >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Button Engine Start System >> PDM (Power Distribution Module) >> DTC B1602: CAN Error >> DTC Detecting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B1602: CAN Error: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item Detecting Condition Possible Cause
DTC Strategy
  • CAN communication status
  • Short to battery/ground in CAN high circuit
  • Short to battery/ground in CAN low circuit
  • Short between CAN high and CAN low circuit
  • Open or poor connection in CAN high and low circuit.
  • Faulty IPM
Enable Conditions
  • IG "ON"
  • Engine "START"
  • B/T voltage energized to PDM
Threshold Value CAN high 0 V Short to ground
B+ V Short to battery
CAN low 0 V Short to ground
B+ V Short to battery
Diagnostic Time
  • Failure has been continued for 2sec.
DTC Erasing Time
  • DTC is erased immediately after trouble fixed (In case of the past error, perform DTC erasing procedure.)
scientia non olet · About LEMON Manuals