LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Santa Fe Limited, 2.4 B >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G2.4 DOHC >> Engine Control Module (ECM) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

NOTE: In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together. (Refer to TEACHING PROCEDURES .)
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM Connector (A).
    Fig 1: Identifying ECM Connector
    G06846815Courtesy of HYUNDAI MOTOR CO.
  3. Remove the air cleaner assembly. (Refer to INTAKE AND EXHAUST SYSTEM .)
  4. Remove the mounting bolts (A), and then remove the ECM (B).
    Fig 2: Identifying ECM With Mounting Bolts
    G06846816Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals