LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> VCM Position Sensor >> Repair procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold. (Refer to INTAKE AND EXHAUST SYSTEM .)
  3. Remove the installation screws (A), and then remove the VCM position sensor.
    Fig 1: Locating VCM Position Sensor Screws
    G06844932Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals