Repair Procedures: Replacement

Turn ignition switch OFF.
Disconnect the negative (-) battery cable.
Remove the air cleaner assembly.
(Refer to "INTAKE AND EXHAUST SYSTEM " )
Disconnect the TCM connector (A).

Fig 1: Identifying TCM Connector
Courtesy of HYUNDAI MOTOR CO.
Remove the TCM (C) after removing the mounting bolts (A) and nut (B).
TCM installation bolt/nut:

(A), (B) 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 2: Identifying TCM, Mounting Bolts And Nuts
Courtesy of HYUNDAI MOTOR CO.