Repair procedures (M5GF1): Removal

Remove the center console. (Refer to "CONSOLE " in BD group).
Remove the snap pin (B) and the clip (A) from the select cable assembly.

Fig 1: Removing Snap Pin And Clips From Select Cable Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the clip (A) from the shift cable assembly.

Fig 2: Identifying Shift Cable Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the shift lever assembly (A).
Tightening torque:

8.8~13.7N.m (0.9~1.4kgf.m, 6.5~10.1lb-ft)

Fig 3: Identifying Shift Lever Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the retainer (A) and nuts (B).

Fig 4: Identifying Retainer With Nuts
Courtesy of HYUNDAI MOTOR CO.
Remove the select and shift cable assembly from the transaxle. (Refer to TRANSAXLE REMOVAL ).

Fig 5: Identifying Shift Cable Assembly On Transaxle
Courtesy of HYUNDAI MOTOR CO.