LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Azera >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Inhibitor Switch >> Repair Procedures >> Inspection >> Signal Circuit Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Signal Circuit Inspection

  1. Connect the Inhibitor switch connector (A).
  2. Ignition KEY "ON" & Engine "OFF".
  3. Measure voltages between each terminal and chassis ground during shift lever changed "P, R, N, D".

    Specification:  See below "Inhibitor switch specification"

    SIGNAL CODE DESCRIPTION

      P P-R R R-N N N-D D
    Signal 1 12V 12V 0 0 0 0 0
    Signal 2 0 12V 12V 12V 0 0 0
    Signal 3 0 0 0 12V 12V 12V 0
    Signal 4 0 0 0 0 0 12V 12V
    Fig 1: Identifying Inhibitor Switch Connector
    G08809979Courtesy of HYUNDAI MOTOR AMERICA

    [Connection Information] 

    Fig 2: Identifying Inhibitor Switch Connector Chart
    G08809980Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals