LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Elantra Touring GLS, Automatic Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Shift Lever >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Lever: Removal

  1. Remove the shift lever knob (A).
    2. Fig 1: Identifying Shift Lever Knob
    G06136557Courtesy of HYUNDAI MOTOR CO.
  2. Remove the center console cover (A).
    3. Fig 2: Identifying Center Console Cover
    G06136558Courtesy of HYUNDAI MOTOR CO.
  3. Remove the center console, (refer to CONSOLE )
  4. Remove the shift cable assembly (B) by removing the clamp (A).
    5. Fig 3: Identifying Shift Cable Assembly And Clamp
    G05364296Courtesy of HYUNDAI MOTOR CO.
  5. Disconnect the interlock switch connector (A).
    6. Fig 4: Identifying Interlock Switch Connector
    G05364297Courtesy of HYUNDAI MOTOR CO.
  6. Remove the shift lever assembly (A).
    7. Fig 5: Identifying Shift Lever Assembly
    G05364298Courtesy of HYUNDAI MOTOR CO.
  7. Remove the retainer (A) and nuts (B).
    NOTE: In case, remove the crush pad and cowl cross bar. (refer to CRUSH PAD and HEATER UNIT )
    Fig 6: Identifying Retainer And Nuts
    G05364299Courtesy of HYUNDAI MOTOR CO.
  8. Remove the shift cable assembly from the transaxle (refer to REMOVAL ).
  9. Remove the shift cable assembly.
scientia non olet · About LEMON Manuals