RDM Side Curtain Control

According to power window Close condition and curtain position, Rear Side Curtain is operated as following

• Only the side curtain is operated where Power window is close.
• The Side curtain is always in down condition when Power window is open condition,
• The side curtain is controlled Remote Request of DDM and opposition RDM and Local Power window Input.
• Side Curtain is selected by variety.
• If Side Curtain exists, Side Curtain operates when WakeUp signal transmits to SFE after 200ms.

1. Side Curtain Arbitration

   Power window Position	Curtain Position	Curtain SW		Remote Request
   				OFF	MANUAL UP	MANUAL DOWN	AUTO UP	AUTO DOWN	Stop
   Max Up	Not Bottom	Local SW	OFF	-	(2)	(1)	(2)	(1)	-
   			MANUAL UP	(2)	(2)	-	(2)	-	-
   			MANUAL DOWN	(1)	-	(1)	-	(1)	-
   			AUTO UP	(2)	(2)	-	(2)	-	-
   			AUTO DOWN	(1)	-	(1)	-	(1)	-
   	Bottom	Local SW	OFF	-	ON	-	ON	-	-
   			MANUAL UP	ON	ON	-	ON	-	-
   			MANUAL DOWN	-	-	-	-	-	-
   			AUTO UP	ON	ON	-	ON	-	-
   			AUTO DOWN	-	-	-	-	-	-
   : ignored (1) Rear side curtain signal is ON for 100ms. (MANUAL DOWN or AUTODOWN) (2) Rear side curtain signal is ON for 150ms. (MANUAL UP or AUTO UP) *3, *4: If Curtain Position or Power window Position is not valid, Curtain SW is only OFF regardless of other condition.

   1. Basic SW input of Side Curtain
      Fig 1: Side Curtain Basic SW Input Blinking Pattern

      Courtesy of HYUNDAI MOTOR AMERICA
   2. Reverse SW input in Side Curtain output
      Fig 2: Side Curtain Reverse SW Input Blinking Pattern

      Courtesy of HYUNDAI MOTOR AMERICA
   3. Same SW input during SFE Signal operation
      Fig 3: SW Input Blinking Pattern (During SFE Signal Operation)

      Courtesy of HYUNDAI MOTOR AMERICA
   4. Same SW input after SFE Signal operation
      Fig 4: SW Input Blinking Pattern (After SFE Signal Operation)

      Courtesy of HYUNDAI MOTOR AMERICA
   5. Three SW input of Side Curtain
      Fig 5: Side Curtain Three SW Input Blinking Pattern

      Courtesy of HYUNDAI MOTOR AMERICA
   6. SW input during Side Curtain Operation
      Fig 6: SW Input Blinking Pattern (During Side Curtain Operation)

      Courtesy of HYUNDAI MOTOR AMERICA
   7. Sleep/WakeUp Control
      • Sleep status
        Fig 7: Sleep/WakeUp Control System Blinking Pattern (Sleep Status)

        Courtesy of HYUNDAI MOTOR AMERICA
   8. WakeUp status
      Fig 8: Sleep/WakeUp Control System Blinking Pattern (Wakeup Status)

      Courtesy of HYUNDAI MOTOR AMERICA