Front View Mode Function

PGS action condition to display front view camera is as follows.

1. When IGN1 signal is ON.
2. When BLIND SW is ON.
3. When "P" and "R" positions are all OFF.
4. When Speed spec is satisfied.
5. Vehicle speed Spec.
   1. It is applied to hysteresis for chattering prohibition in relation to vehicle speed signal.
   2. Precondition: BLIND switch is ON and the gear position is N/D.
   1. When vehicle's speed is 10KPH or below, Front monitor display is ON.
   2. When vehicle's speed is changed to 10KPH or more at the Front View mode, the Front View mode is finished. (When front monitor display is ON in the situation to be over 10KPH to 8KPH less.)
   3. Vehicles speed tolerance: ±10%

If all of upper operation conditions are satisfied, PGS operates to Front View mode.