LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Genesis Coupe 2.0T, Automatic Trans >> Repair and Diagnosis >> Electrical >> Starter >> Button Engine Start System >> PDM (Power Distribution Module) >> Repair Procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A).

    (Refer to "CRASH PAD ")

    Fig 1: Identifying Crash Pad Lower Panel
    G06510252Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the power distribution module (PDM) connector.
  4. Remove the power distribution module (A) after loosening nut and bolt.
    Fig 2: Identifying Power Distribution Module, Bolt, & Nut
    G06510253Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals