Repair Procedures: Removal

[CVVT Oil Control Valve (Intake)] 

1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Remove the intake manifold (Refer to "INTAKE AND EXHAUST SYSTEM ").
3. Disconnect the CVVT oil control valve connector (A).
Fig 1: Identifying Intake CVVT Oil Control Valve Connector & Mounting Bolt
Courtesy of HYUNDAI MOTOR CO.
4. Remove the mounting bolt (B), and then remove the valve from the engine.

[CVVT Oil Control Valve (Exhaust)] 

1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Disconnect the CVVT oil control valve connector (A).
   Fig 2: Identifying Exhaust CVVT Oil Control Valve Connector

   Courtesy of HYUNDAI MOTOR CO.
3. Remove the cylinder head cover (Refer to CYLINDER HEAD ASSEMBLY (ENGINE MECHANICAL) - 3.8L ).
4. Remove the mounting bolt (A), and then remove the valve from the engine.
   Fig 3: Identifying Exhaust CVVT Oil Control Valve Mounting Bolt

   Courtesy of HYUNDAI MOTOR CO.