LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> Barometric Pressure Sensor (BPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the barometric pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the air cleaner assembly.
    Fig 1: Locating Barometric Pressure Sensor Connector And Bolt
    G06844876Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals