Control Cable Replacement

WARNING: This page is about a different variant/trim than selected.

Remove the center console assembly.
(Refer to "INTERIOR CONSOLE )" )
Remove the control cable (B).

Fig 1: Identifying Control Cable
Courtesy of HYUNDAI MOTOR CO.
Remove the control cable assembly in the vehicle after removing the nuts (B) and the retainer (A).
Tightening torque:

9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.9 lb-ft)

Fig 2: Identifying Nuts And Retainer
Courtesy of HYUNDAI MOTOR CO.
Remove the nut (C).
Remove the cable (B) from the bracket (A) at transaxle assembly side.
(Refer to "AUTOMATIC TRANSAXLE " ).

Fig 3: Identifying Transaxle Assembly, Side Cable And Bracket
Courtesy of HYUNDAI MOTOR CO.
Remove the control cable inside of cab.