Repair Procedures: Removal

Disconnect the negative (-) battery terminal.
Remove the hazard lamp switch assembly (A).

Fig 1: Identifying Hazard Lamp Switch Assembly
Courtesy of HYUNDAI MOTOR CO.

NOTE: Take care not to damage and scratch the hazard lamp switch assembly and its related parts.
Apply the protective tapes to the hazard lamp switch assembly and its related parts.
Disconnect the connectors (A).

Fig 2: Identifying Electrical Connectors
Courtesy of HYUNDAI MOTOR CO.
Remove the center fascia panel (A).

Fig 3: Identifying Center Fascia Panel
Courtesy of HYUNDAI MOTOR CO.
Remove the audio assembly (A) after loosening the mounting screws.

Fig 4: Identifying Audio Assembly
Courtesy of HYUNDAI MOTOR CO.
Disconnect the audio connectors and cable (A), then remove the audio unit completely.

Fig 5: Identifying Audio Connectors And Cable
Courtesy of HYUNDAI MOTOR CO.

NOTE: When the compact disc is not ejected, do not remove it forcibly.