LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Tucson GL, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the heater & A/C controller from center fascia panel.

    (Refer to CONTROLLER .)

  3. Remove the front seat heater switch assembly.

    (Refer to FRONT SEAT .)

  4. Remove the right air vent.

    (Refer to REAR GLASS DEFOGGER .)

  5. Loosen the nut and bolt from BCM.
    Fig 1: Identifying BCM Nut And Bolt
    G06873652Courtesy of HYUNDAI MOTOR CO.
  6. Insert the hand to right air vent hole to disconnect the BCM connectors.

    And then remove the BCM (A) from the heater & A/C controller hole.

    Fig 2: Removing BCM
    G06873653Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals