General Information: DTC Detecting Condition

DTC DETECTING CONDITIONS

Item	Detecting Condition	Possible Cause
DTC Strategy	Plausibility check between TPS1 and TPS2	Faulty TPS2 Poor connection or damaged harness
Enable Conditions	No engine stop and engine start No TPS adaptation request No relevant failure
Threshold Value	An absolute value of TPS2 - TPS1 > 7.6%
Diagnostic Time	0.3 sec.
MIL On Condition	1 Driving Cycle
Limp-Home	Forced limited power mode: When the DTC is set, the PCM reduces engine torque by 25% of normal value. The PCM uses TPS1 signal to monitor the controlled opening angle of the throttle valve.