LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Tucson GLS, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Identifying Crankshaft Position Sensor Connector
    G06872202Courtesy of HYUNDAI MOTOR CO.
  3. Remove the protector (A).
    Fig 2: Identifying Protector
    G06872203Courtesy of HYUNDAI MOTOR CO.
  4. Remove the installation bolt (A), and then remove the crankshaft position sensor.
    Fig 3: Identifying Installation Bolt
    G06872204Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals