LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Veloster Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine Control System - Turbo) >> ETC (Electronic Throttle Control) System Loading >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
    Fig 1: Electronic Throttle Control Module Connector
    G09151049Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolts, and then remove the ETC module (A) from the engine.
    Fig 2: Electronic Throttle Control Module
    G09151050Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals