Repair Procedures: Installation
WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
- Install in the reverse order of removal.NOTE:
- Adding Automatic Transaxle Fluid (ATF).
(Refer to "FLUID ")
- Perform Transaxle Control Module (TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair Procedures ")
- Adding Automatic Transaxle Fluid (ATF).