Rear Wheel Alignment: Toe

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Toe In And Toe Out

Courtesy of HYUNDAI MOTOR AMERICA

B - A > 0: Toe in (+)

B - A < 0: Toe out (-)

Toe is pre-set at the factory, so it does not need to be adjusted. If the toe is not within the standard value, replace or repair the damaged parts and then inspect again.

Toe:

Total: 0.5°(+0.5°/-0.4°)

Individual: 0.25°(+0.25°/-0.2°)