LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Veloster Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Heater System) >> Mode Control Actuator >> Repair procedures >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Replacement

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the side cover (A).
    Fig 1: Side Cover
    G09135471Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the fuse box cover (A) and loosen the mounting screws and then remove the crash pad lower cover (B).
    Fig 2: Crash Pad Lower Cover And Fuse Box Cover Mounting Screws
    G09135472Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the diagnosis connector (A).
    Fig 3: Diagnosis Connector
    G09135473Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the shower duct (A).
    Fig 4: Shower Duct
    G09135474Courtesy of HYUNDAI MOTOR AMERICA
  6. Disconnect the temperature control actuator connector (A) and loosen the mounting screws and then remove the temperature control actuator (B).
    Fig 5: Temperature Control Actuator & Connector
    G09135475Courtesy of HYUNDAI MOTOR AMERICA
  7. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals