Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.

Remove the under cover.
Disconnect the input shaft speed sensor connector (A).

Fig 1: Identifying Input Shaft Speed Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting bolt and then remove the input shaft speed sensor (B).

Fig 2: Identifying Input Shaft Speed Sensor Mounting Bolt
Courtesy of HYUNDAI MOTOR AMERICA