Repair Procedures: Replacement

WARNING: This page is about a different car, the 2014 Hyundai Veloster and 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front wheel & tire.
Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Fig 1: Identifying Front Wheel & Tire
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: Be careful not to damage to the hub bolts when removing the front wheel & tire.
Loosen the nut and remove the lower arm (A).
Tightening torque:

78.5 ~ 88.3 N.m (8.0 ~ 9.0 kgf.m, 57.9 ~ 65.1 lb-ft)

Fig 2: Identifying Lower Arm And Nut
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the bolts & nuts and then remove the lower arm (A) with the sub frame.
Tightening torque:

Front

98.1 ~ 117.7 N.m (10.0 ~ 12.0 kgf.m, 72.3 ~ 86.8 lb-ft)

Fig 3: Identifying Lower Arm And Nut
Courtesy of HYUNDAI MOTOR AMERICA

Tightening torque:

Rear

156.9 ~ 176.5 N.m (16.0 ~ 18.0 kgf.m, 115.7 ~ 130.2 lb-ft)

Fig 4: Identifying Lower Arm And Bolt
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.