Repair procedures (F21): Inspection
NOTE:
Refer to Input Speed Sensor
in order to inspect the output speed sensor (SP).
CAUTION:
- Do not damage the output speed sensor (SP).
- Do not damage the terminals.
- Connecting terminal 2 to a battery positive terminal, connect the battery negative terminal to terminal 1 through resistance of 100Ω and ammeter.
- Measure currency value when shaking metalshards (magnetic material) back and forthwith a top of input speed sensor (NIN) (less than 5mm).
Specification [mA] :
12-16 (HIGH), 4-8 (LOW)