LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Accent GLS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle Control System) >> Output Speed Sensor >> Repair procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Installation is the reverse of removal.
    NOTE:
    • The gasket of the valve body cover gasket (A) use new one.
    • Adding automatic transaxle fluid.

      (Refer to "Hydraulic system (FLUID )" )

      Fig 1: Identifying Valve Body Cover Gasket
      G08804710Courtesy of HYUNDAI MOTOR AMERICA
    • Perform TCM learning after replacing the automatic transaxle to prevent slow automatic transaxle response, jerky acceleration and jerky startup.

      (Refer to "Automatic transaxle control system (REPAIR PROCEDURES) " )