Shift Lever Assembly Replacement

Remove the center console assembly.
(Refer to "CONSOLE " .)
Disconnect sports mode connector (A).

Fig 1: Sports Mode Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the control cable (A).

Fig 2: Control Cable
Courtesy of HYUNDAI MOTOR AMERICA
Remove the shift lever assembly (A) by removing the bolts.
Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 3: Shift Lever Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.
NOTE: Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.