LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC P0223: Throttle/Pedal Position Sensor/Switch 'B' Circuit High Input >> General Information >> DTC Detecting Condition
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Short to Battery or Open circuit
  1. Open in ground circuit
  2. Short to battery in signal circuit
  3. Poor connection or damaged harness
  4. Faulty TPS2
Enable Conditions
  • Ignition "ON"
Threshold Value
  • TPS2 > 4.9V
Diagnostic Time
  • 0.05 sec.
MIL On Condition
  • 1 Drive Cycle
Limp-Home
  • Forced limited power mode: When the DTC is set, the PCM/ECM reduces engine torque by 25% of normal value.
  • The PCM/ECM uses TPS1 signal to monitor the controlled opening angle of the throttle valve.